Tel: +86-29-88611434
Home > News > Content

The Paving Mode Of Color Steel Tile

Color steel tile, also known as color pressure type tile, is the use of color coated steel plate, roll pressure cold bending into a variety of wave-type pressure plate, has been widely applied. What is the characteristic of the color steel tile? What are the uses of color steel tile? Next, let's take a look!

Characteristics of color Steel tile

⒈ Light Weight: 10-14 kg/m², equivalent to 1/30 of brick wall.

⒉ thermal conductivity: λ<=0.041w/mk.

⒊ high strength: can be used for smallpox enclosure structural plate load bearing, Color Steel Tile bending and pressure resistance;

⒋ Bright color: No surface decoration, color galvanized steel plate preservation period of 10-15 years.

⒌ installation flexible and fast: Color Steel Tile the construction cycle can be shortened by more than 40%.

⒍ Oxygen Index: (OI) 32.0 (province Fire Products quality control station).

Installation of color steel tile

A. Tile proper way to lay

⒈ overlapping (suitable for length ≦15m roofing)

⒉ staggered (suitable for length ≧15m roofing)

Two. Proper use of special nails

⒈ Special nail must be hit in the middle of the tile bone can have waterproof effect.

⒉ Special Nail fixed interval is 50cm~100cm (good 4 root/㎡).

⒊ Special nail must be from the lower end of the tile to the roof direction to have a beautiful, sealed, neat effect.

Three. Installation of the sealing strip Ridge tile cover

The ⒈ separates the sealing strip in two halves, Color Steel Tile and the tile is pressed on the roof to cover the ridge tile with a special nail.

The junction of the ⒉ side tile is sealed with cement and directly covered with a ridge tile, Color Steel Tile and the bottom of the ridge tile ends with a small tile file.

The lower end of the ⒊ tile is the roof where the eaves cover is directly mounted with a screw fixed.

⒌ Ridge Junction, the control interface with scissors after the formation of overlapping and use of glass sealant.

Four. Highlight part of water treatment

First do a V-shaped material, you can choose different materials and specifications, Color Steel Tile depending on the actual situation. To do the water is installed at the bottom of the shop on the top of the color steel tile.

Five. Tilt Surface Connection Installation

Refers to the construction of water treatment at the bottom of the two roofing tiles after cutting off the angle and length. First, install the water-receiving material (i.e. gutter) under the tile, and then finish the finishing treatment with waterproof adhesive or cement.

Notes on color steel tile

Wear the necessary safety facilities (such as gloves, helmets, belts and other tools).

Professionals who need to be certified for the installation of workers.

The skeleton must be securely installed.

The installation needs to be on the top of the tile and try to step on the middle of the tile to avoid stepping on the edge of the tile.

Careful installation is required in inclement weather.

Color steel tile It is suitable for industrial and civil buildings, warehouses, special buildings, large-span steel structure housing roof, Color Steel Tile wall and interior and exterior wall decoration, with light weight, high strength, rich color, convenient construction, earthquake resistance, fire prevention, rain prevention, long life, maintenance-free and so on.