Tel: +86-29-88611434

China Factory Supply Synthetic Resin Tile Type Single Layer, Plastic Heat Insulation Roof Tile/Corrugated Plastic Roof Sheet/ASA Plastic Roof Tiles

Thickness :2.3, 2.5, 3.0mm(±0.2mm)
Overall Width:880mm
Efficient Width:800mm
Wave Spacing:160mm
Wave Height:30mm
Wave Pitch :250mm
Surface:glaze,pitted surface
Purlin distance:750mm
Length:6m or less than 6m, can be customized but should be multiple of 250mm (wave pitch)
Color:purplish red, bright red, brick red, sky blue, grey, dark green, white, golden, or customized

Detailed description

China Factory Supply Synthetic Resin Tile Type Single Layer, Plastic Heat Insulation Roof Tile/Corrugated Plastic Roof Sheet/ASA Plastic Roof Tiles



Synthetic Resin Roof Tile Introduction :


Synthetic Resin Roof Tile is an excellent waterproof and new multifunctional building material which has been widely used in different country .It has a high level of sound absorption and heat insulation .
Synthetic Resin Roof Tile is also light-weight for easy installation , maintance and use .
In extreme weather and different climates,it is more reliable and durable than other
traditional roofing material .


synthetic resin roofing tiles..jpg

 

Synthetic Resin Roof Tile Material:



Acrylonitrile Styrene acrylate copolymer (ASA) engineering plastics is acrylate rubber body the graft copolymer of Styrene and Acrylonitrile).
Polyvinyl chloride (PVC),vinyl chloride monomer (vinyl chloride monomer, VCM) in peroxide, azo compound initiator;Or under the action of light, heat by free radical polymerization reaction mechanism of polymerization of polymer.Vinyl chloride homopolymer system called vinyl chloride and vinyl chloride copolymer resin.
Light Calcium Carbonate, Light Calcium Carbonate, also known as the precipitation of Calcium Carbonate, Precipitated Calcium Carbonate, PCC).The light calcium carbonate is a chemical processing method, the.Because of its settlement volume (2.4 to 2.8 mL/g) than with mechanical method in the production of heavy calcium carbonate sedimentation volume (1.1 to 1.9 mL/g), therefore is called light calcium carbonate.

Synthetic Resin Roof Tile Auxiliary Material:
Polyester fiber, etc.
Polyester (polyester fibre) composed of organic dibasic acid and glycol polycondensation of polyester


by the spinning of synthetic fibres.Polyester fiber are mainly made of polyethylene terephthalate, Chinese goods is called polyester and PET fiber.The first big varieties is the synthetic fiber.In addition to a small amount of poly and glycol terephthalate fiber, PTT polyester fiber.

 

Products advantage:



1. Super strong weather fastness and long service life
The surface material select weather fastness ASA resin, which can keep the stability of color and physical performance even though long-term exposure to ultraviolet ray, hot, cold and rainy. The overlong service life eliminates the waste and cost of secondary construction. By the national authoritative organization detect (Beijing chemical building materials test center), artificial aging test 12000 hours, Δ Ε = 4.6, equivalent to can use over 38 years under natural environment.
2. Super strong impact resistance, well low temperature resistant effect
The adoption of HTRE composite technology make the nanometer high strength glass fiber composite layer of product can exert strong impact resistance, 4 kg of steel ball free fall at the height of 3m, there are no any crack produced on the surface of the tile, the shock resistance is more than 3 times as the same thickness of synthetic resin tile, the hail with in middle to lower strength can hardly damage to the product.( Note: the thickness of the product are more than 25 mm; Except for severe weather). The product easily pass the low temperature drop hammer experiment and with10 freeze-thaw cycles, the product has no empty drum, foaming, stripping and crack phenomenon.
3.Excellent anti-loading performance
Synthetic tile has good load resistance, increase the weight of 150 kg in the case of support between 660 mm; Tile surface of tile no cracks and no signs of damage.
4.Self-cleaning
The clean engineering of Urban roof is time-consuming, strenuosity and high risk. The surface of resin tile is smooth and compact, which is not easy to absorb dust and with lotus leaves effect. The tile is clean as new after the rain washed, which will not appear stains after fouling by rain wash. Keep the insulation to save energy.
5.Thermal insulation and energy saving
Regardless of the cold winter or hot summer, synthetic resin tile can reduce the bad climate impact outside of the roof, two-way equilibrium temperature, warm in winter and cool in summer and saving energy.
6. Color lasting
The product can be ensured not fade 10 years, if need to change color to match new plan, no need to change, only need to spray color.
7. Excellent decay resistance
Synthetic resin tile with high weatherability resin and the main body of resin have good corrosion resistance, the performance will not slow owing to the erosion of snow and rain, which can long time to defense the erosion of acid, alkali, salt and other chemical substances, therefore this product are suitable for salt fog corrosion serious areas and high air pollution areas.
8. Environment protecting
The products are no radiation, no volatile substances after inspected; Production, low-energy during production and installation period, no pollutant emissions; which can be completely recycled use after service life end. Even the harshest environmental requirements of Europe, synthetic resin tile can transcend as well.
9. Light mass and easy installation
Synthetic resin tile is 5-6kg per square meter. Large area with single piece and no lap joint in lengthways, which reduce the constructional difficulties and time consumption. The auxiliary product are complete and with simple tools and simple working procedure.

synthetic resin roofing tile advantages.jpg


Application:

synthetic roof tile is a new type of roofing material. It is using the ASA engineering resin as the surface material, double layer co-extrusion with PVC resin, suitable for ourdoor application.

It is widely used for flat-to sloping roof conversion, villas, shopping malls, residential areas, new rural resident construction, awning, concrete structures, steel structures, wood structures, brick structures and other hybrid structure slop roof and so on.

synthetic resin roof tile application.jpg 

 

Specification: 


Thickness

2.3, 2.5, 3.0mm(±0.2mm)

Overall Width

880mm

Efficient Width

800mm

Wave Spacing

160mm

Wave Height

30mm

Wave Pitch

250mm

Surface

glaze,pitted surface

Purlin distance

750mm

Length

6m or less than 6m, can be customized but should be multiple of 250mm (wave pitch)

Color

purplish red, bright red, brick red, sky blue, grey, dark green, white, golden, or customized

 

synthetic resin roofing tile color.jpg

 


Production flow:

synthetic resin roof tile production flow.jpg

 


Product Show:

ASA coated synthetic resin roof tiles.jpg

synthetic resin roof sheet.jpg




single layer synthetic resin roof tiles.jpg



Our workshop:

synthetic resin roof tile workshop.jpg

 

Our company,XI’AN SANMIN CONSTRUCTION MATERIALS CO.,LTD has exported all kinds of roof tiles from 1998 with top quality and competitive price,inlcuding ASA PVC plastic roof tiles,metal roof tiles,spanish roof tile,corrugated roof tiles,etc.


Our products are hot sale in America ,Europe and Middle-East and Asia.
Welcome you to inquiry the details!


Our main products as follows:


1.Synthetic resin roof tiles
2.Wave roof tile
3.Corrugated roof tile
4.Color steel tile
5.Galanized steel strip
6. C type steel

 


Our Services

Product & Technology Support:


Providing Production Report and test report.
Competitive shipment service.
Complete after-sales service.
New Shape & Color design and Quantity budget according to your drawing.


Sample Support:
Sample free
Provide Sample Inspection & Analysis
Complete choice of shape & color


 

If you have any inquiry or requirement, pls feel free to contact us at andyma@3m-tile.com


<tbody

Welcome to wholesale the china factory supply synthetic resin tile type single layer, plastic heat insulation roof tile/corrugated plastic roof sheet/asa plastic roof tiles from our factory. As one of the professional China manufacturers and suppliers, we can assure you of its good corrosion resistance and excellent decorative value. Please be free to get the quality tile for sale from us and enjoy our cheap price.


 



Related Products
Feedback